|
|
ECO MODEL 19 SERIES |
|
PLEASE NOTE, WE HAVE A NEW EMAIL ADDRESS:
jhsim@petrocollect.com
 |
 |
 Cut-off valve assembly - Models 19, 20, 39 & 40 |
|
|
This series of ECO Air
Meters was introduced in 1925. |
PARTS
| # | PART NUMBER | PICTURE | DESCRIPTION | PRICE |
| 1-2 | 8001 | Crank Handle, reproduction, aluminum | $50.00 | |
| 1-2 | Crank Handle, used original | |||
| 2 |
 |
Crank handle nut, used | ||
| 3 | Cotter pin | |||
| 4 |  |
Stop nut | ||
| 5/6 |
 |
Tension screw with pin | ||
| 7 |  |
Frame housing. The frame for the ECO
19, 29 and 33 Series meters is not the same housing as used on the
Gilbarco's. Almost the same and they may interchange, but I am
not sure. ECO housing will have the word "PENN" stamped inside. |
||
 |
Rear inside cover | |||
| 8 | Strainer cap | |||
| 9 |  |
Strainer body | ||
| 10 | Coupling nut | |||
| 11 | Strainer | |||
| 12 |  |
Two size bells were used on ECO
mechanisms. Looking at the bell, if it is on the right side,
the bell measures about 3 1/2" wide. If it is on the left side is about 3" wide. This large bell is used |
25.00 | |
| 7502 |
 |
New 3" bell | 17.00 | |
| 13 | Conveyor tube | |||
| 14 |
 |
Complete valve assembly, used condition unknown | sold | |
| 15 |  |
Lock nut, two required | sold | |
| 16 | Packing gland nut | |||
| 17 | Plunger pin | |||
| 18 |
 |
|||
| 19 | Link | |||
| 20 | Bell pin | |||
| 21 |  |
Link keeper | ||
| 22 | Hex brass nut | |||
| 23 | Beam bushing screw | |||
| 24 |
 |
Main tension spring | ||
| 25 | Trip link pins | |||
| 26 | Dial face | |||
| 27, 32 |
 |
Main arm & upper diaphragm | sold | |
| 27 |  |
sold | ||
| 28 |  |
Trip arm | ||
| 29 | Main arm roller pin | |||
| 30 | Trip spring | |||
| 31 | Included with 27/32 | Main arm pivot pin | ||
| 32 | See 27/32 | Upper diaphragm | ||
 |
Rubber diaphragm we make these |
35.00 | ||
 |
Spring disc | sold | ||
 |
Diaphragm spring | sold | ||
| 34 |  |
Lower diaphragm | ||
| 35 | Diaphragm screw | |||
| 36 | Trip spring stud | |||
| 38 |  |
Tee with timer valve | ||
| 39 | Coupling nut | |||
| 40 | Rack assembly screw | |||
| 41 | Pointer | |||
| 42 | Dial clamp nut | |||
| 43 |  |
Bell screw & sleve | ||
| 45 |  |
Bell clapper screw | ||
| 46 |  |
Bell clapper | ||
| 47 | Coupling nut | |||
| 48 | Coupling nut | |||
| 49 | Rocking beam | |||
| 50 | Rocking beam bushing | |||
| 51 | Bell bushing | |||
| 52 | Bell clapper bushing | |||
| 53 | Diaphragm steel plate | |||
| 54 | Inflator cover plate | |||
| 55 | Wing nut | |||
| 56 | Rack bar | |||
| 56, 57, 58, 59 |
|
sold | ||
| 58 | Rack body casting | |||
| 58 | Pointer shaft and pinion | |||
| 59 | Pointer shaft nut | |||
| 60 | Pointer shaft spring | |||
| 61 | Rack stop screw | |||
| 62 | Rack support pin | |||
| 63 | Hex nut | |||
| 64 | Main arm pin | |||
| 65 |  |
Hook plate | ||
| 66 | Dial location stud | |||
| 67 | Beam stop pin | |||
| Reproduction reset handle, made out of aluminum | ||||
| 70001N |
 |
This was marked rebuilt when I purchased it, but it was probably rebuilt 40+ years ago. Bell is chrome plate, everything is nice, but I cannot guarantee the working condition. | sold | |
| 70001U |
 |
I was told this was rebuilt, but it does not look like it. Everything is there, no guarantee as to working condition. | SOLD | |
| 7544 |
 |
Air hose, 25' red | 27.00 | |
| 7550 |
 |
Air chuck | 12.00 | |
 |
Used side for 39 or 40 Islander. Still can read the AIR printing. Nice condition, no dents. | sold | ||
 |
Reproduction side panels. 25" across, very nice | sold | ||
LITERATURE
| PICTURE | DESCRIPTION |
 |
Service Manual for the 19 Series Air
Meters. Original Date if known: 1928 Number of pages: 44 Size: 5" X 7" Price 50.00 ECO19SM-01 |
 |
Service Manual for the 19 Series Air
Meters. Laser copy Date if known: 1928 Number of pages: 44 Size: 8.5" X 11" Price 15.00 ECO19SM-02 |
 |
Parts sheet for the 19, 29, 39 & 40 (does
not cover the head). Original Date if known: 1947 Number of pages: 4 Size: 8 1/2" X 11" Price: $40.00 ECO19P-01
|
|
|
Parts sheet for the 19, 29, 39 & 40 (does
not cover the head) Laser copy Date if known: 1947 Number of pages: 4 Size: 8 1/2" X 11" Price: $20.00 ECO19P-02
|
 |
Parts sheet for the 24, 25, 28, 29, 44,
45, 48 & 49 (does not cover the head). Original Date if known: 1947 Number of pages: 2 Size: 8 1/2" X 11" Price: $20.00 ECO24P-01
|
|
|
Parts sheet for the 24, 25, 28, 29, 44,
45, 48 & 49 (does not cover the head). Laser copy Date if known: 1947 Number of pages: 2 Size: 8 1/2" X 11" Price: $20.00 ECO24P-02
|
 |
Parts sheet for the 26, 46, 47, 50, 60 &
61 (does not cover the head) Original Date if known: 1949 Number of pages: 4 Size: 8 1/2" X 11" Price: $40.00 ECO26P-01
|
|
|
Parts sheet for the 26, 46, 47, 50, 60 &
61 (does not cover the head) Laser copy Date if known: 1949 Number of pages: 4 Size: 8 1/2" X 11" Price: $20.00 ECO26P-02
|
 |
Parts sheet for the head of all the units
listed above. Original Date if known: 1947 Number of pages: 2 Size: 8 1/2" X 11" Price: $20.00 ECO19P-03
|
|
|
Parts sheet for the head of all the units
listed above. Laser copy Date if known: 1947 Number of pages: 2 Size: 8 1/2" X 11" Price: $10.00 ECO19P-04
|
 |
Care and Adjustment for all the models
listed above. This is about as close as I have found for a
Service Manual for this model. Original Date if known: 19 Number of pages: 4 Size: 8 1/2" X 11" Price: $25.00 ECO19P-05
|
|
|
Care and Adjustment for all the models
listed above. This is about as close as I have found for a
Service Manual for this model. Laser copy Date if known: 19 Number of pages: 4 Size: 8 1/2" X 11" Price: $13.00 ECO19P-06
|
|
Brochure shows the ECO 20 Original Copy Date if known: 194 Number of pages: 2-Back-to-Back Size: 8 1/2" X 11" Price: $16.00 ECO20S-1 |
|
Color brochure shows all the ECO air
equipment Original Date if known: 1928 Number of pages: 4 Size: 8 1/2" X 11" Price: $40.00 ECO 20S-2 Pictures show the first two pages, at least four more meters shown in color. |
|
|
Color brochure shows all the ECO air
equipment Laser color copy Date if known: 1928 Number of pages: 4 Size: 8 1/2" X 11" Price: $20.00 ECO 20S-2 Pictures show the first two pages, at least four more meters shown in color. |
 |
Ad shows the ECO 20 Original Date if known: 1930 Number of pages: 1 Size: 8 1/2" X 11" Price: $9.00 ECO20A-1
|
 |
Ad shows the ECO 20, 24, 25, 26 and 29 Original Date if known: 1928 Number of pages: 1 Size: 8 1/2" X 11" Price: $12.00 ECO20A-2 |
 |
Ad shows the ECO 20 Original Date if known: 1929 Number of pages: 1 Size: 8 1/2" X 11" Price: $12.00 ECO 20A-3
|
 |
Ad shows the ECO 20 Original Date if known: 1927 Number of pages: 1 Size: 8 1/2" X 11" Price: $10.00 ECO 20A-4
|
 |
Ad shows the ECO 20 Original Date if known: 1928 Number of pages: 1 Size: 8 1/2" X 11" Price: $10.00 ECO 20A-5
|
 |
Ad shows the ECO 20 & 24 Original Date if known: 1926 Number of pages: 1 Size: 5" X 8" Price: $7.00 ECO 20A-6
|
 |
Ad shows the ECO 20 Original Date if known: 1927 Number of pages: 1 Size: 7" X 10" Price: $7.00 ECO 20A-7
|
Copyright 2012
Petroliana Collectibles
All Rights Reserved